Documentation Number pn#8906 VESR9xx-3208qsg rev000
Quick Start Guide
6
Setup Vlinx Manager Software
‰
Open Vlinx Manager: click
StartÆProgramsÆB&B
ElectronicsÆVlinxÆVlinx ManagerÆVESR
Serial Server
Vlinx VESR9xx Serial Servers
‰
The Discovery page opens
3
4
LED Status
LED
STATUS
Ready
Port 1
Blinks if system is operating correctly
On indicates serial port open, blinks when data present on
serial port
‰
‰
To configure via the network, select Network.
If you know the IP address, select The device is
at this address, and type in the address.If not,
select I don’t know the IP address of the device.
Click Connect.
Port 2
Link
Same as Port 1
(Present on 2 port units only)
On indicates Ethernet operating in 100BaseTX, blinks
when data present on Ethernet link
1
Check for All Required Hardware
‰
‰
‰
‰
‰
Vlinx VESR9xx module
This Quick Start Guide
CD with Vlinx Manager s/w and manuals
Network cable (not included)
Serial cable(s) (not included)
‰
OR…Setup the Web Interface
‰
Open a browser and type the IP address of the
serial server in the Address Bar.
Mode Switch
‰
When the serial server is found, the
Configuration window appears.
Hold in Mode switch for…
Result
2
0 to 2 seconds
2 to 10 seconds
Initiates a Hardware Reset
Enters Console Mode
Install the Hardware
More than 10 seconds
Resets to Factory Defaults
‰ Connect a 10 to 48 VDC power supply
‰ Connect the network cable from the serial server to a
network drop using a standard network cable.
VESR92x models are equipped an additional RJ45
Ethernet port. This port allows you to connect a local
Ethernet device to the network and functions like an
Ethernet switch. It does not matter which port is used
for the network connection and the local connection.
‰ Connect the serial device(s):
5
Install Vlinx Manager Software
‰
‰
Insert the included CD and it should autostart
Follow the prompts to install the Vlinx Manager
software.
Note: Be sure you have administrative rights & disable firewalls
in Windows XP and Vista.
o
RS-232 with DB9: straight-through for DCE
device, null modem for DTE device
RS-232/422/485 with terminal blocks: see
Appendix D for pinouts
o
European Headquarters +353 91 792444 Fax +353 91 792445
|
Abocom Network Router UA600GS User Manual
ACDelco Portable Generator AC G0004 User Manual
Acer Projector PD523 User Manual
Adaptec Network Card Storage Manager User Manual
Adcom Stereo Amplifier GTP 760 User Manual
ADTRAN Two Way Radio ISU 2X64 User Manual
ADT Security Services Power Supply ADT APS 6R User Manual
Agilent Technologies Printer Accessories 85671A User Manual
Amana Freezer DC68 02032C User Manual
Behringer Stereo System XR12 User Manual